EXT-USB2 -

"receiver / transmitter of USB 2.0, Ethernet and bidirectional stereo audio signals over CAT6a twisted pair cable with PoC (Power over Cable) 24 V power transmission from transmitter to receiver and vice versa, HDBaseT technology, transmission range up to 100 meters.
• Supports point-to-point topology
• Support for USB 2.0, multi-streaming and connecting multiple USB devices at the same time
• Configurable USB port that can be used as an input or output device
• All six USB ports on the device work simultaneously, allowing you to connect up to six devices to the source
• 1 A of current is supplied to each USB port at the same time
• Automatic USB source recognition
• Manual USB source selection with front panel button
Inputs 1 - audio stereo, 3.5 mm miniJack (female)
Outputs 1 - audio stereo, 3.5 mm miniJack (female)
Ports 1 - HDBaseT twisted pair, RJ45 connector (female)
2 - twisted pair, RJ45 connector (socket)
3 - USB 2.0, type A (socket)
1 - USB 2.0, type mini-B (socket)
500 Mbps throughput for HDBaseT
Number of channels: audio 8, 16, 18, 20, 24, 32
Audio sampling rate 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz
HDBaseT 2.0 specifications
USB 2.0 specifications
Extension over twisted pair up to 100 m
Cable for organizing a transmission line twisted pair CAT6a/7
Serial baud rate 19200 bps
Analog audio
Maximum signal level 2 V RMS at the input
2V RMS output
Input impedance 10 kOhm
Output impedance 470 ohm
Frequency response 20 Hz - 20 kHz (±1 dB)
THD + noise < ?80 dB (0 dBFS, 1 kHz, A-weighted)
Signal-to-noise ratio > 80 dB (0 dbFS)
Crosstalk < ?80 dB (10 kHz)
General characteristics
ESD protection ±8 kV (air discharge)
±4 kV (contact discharge)
Case material steel
Housing color black
Operating temperature range 0…+40 °C
Storage temperature range ?20…+60 °C
Relative air humidity 20…90% (non-condensing)
Power supply 24 V, 2.7 A
Power consumption 52 W
Dimensions (WxDxH) 128 x 108 x 25 mm
Weight 0.37 kg
"