aDSPD-ALTI -
16-channel digital audio processor with Dante support. Line inputs that are programmatically reassigned to microphone inputs. THAT Corp. Microphone Preamps Phantom power ±48 V. Digital signal generator, frequency correction, parametric equalizer, time delay of 10-2000 ms. The ADC/DAC parameters are 24-bit/48 kHz.
- Dante technology allows you to organize the transmission of control signals and digital audio signals over a separate local network
- Open architecture, running software
- 16 audio inputs, 16 audio outputs
- THAT Corp's high-end microphone amplifiers
- 40-bit floating-point DSP processor
- ADC / DAC — 24 bit/48 kHz
- Parametric equalizer, tone and noise signal generator
- Digital filters with a slope of 6-48 dB / octave (Linkwitz-Riley, Bessel, Butterworth)
- Mixing audio signals 8×8, 8×16, 16×8, 16×16
- Adjust the dynamic range of the audio signal (compressor, expander, limiter)
- 48 V phantom power (software-activated)
- Switching on Phoenix-type terminal blocks with 3.5 mm contact spacing
- PoE power supply (optional)
- 1 network input (RJ45) and two Dante network ports (2 RJ45)
- The case is made of aluminum alloy in the rack version, occupies a height of 1U
- On the front panel there is an LED indication of signals at the inputs and outputs
Inputs |
16-mic / line: balanced audio mono, terminal block 4-logic, terminal block |
Outputs |
16-line: balanced audio monitor, terminal block 2-relay, terminal block |
Ports |
2-Dante, RJ45 connector (female) 1-Ethernet, RJ45 connector (female) |
Gain level | -40...+15 dB (0.25 dB step) at the input and output |
Frequency response range | 20 Hz-20 kHz (±0.1 dB) |
Maximum signal strength | +20 dBn |
Input impedance | > 10kOhm |
Output impedance | 50 ohms |
Phantom power | 48 V |
Dynamic range | 110 dB (unweighted) |
CNI | < 0.002 % (1 kHz, +4 dBu) |
Common mode signal attenuation factor | > 100 dB (50 Hz-10 kHz) |
Crosstalk | < -100 dB |
Number of Dante channels | 16 inputs, 16 outputs |
Digital processing |
40-bit floating-point DSP 24-bit ADC/DAC (48 kHz) |
Signal transmission delay | 3 msec |
Equalizer | parametric, graphical, anti-feedback (feedback suppression) |
Filters | Bessel, Butterworth, Linkwitz-Riley |
Cutoff steepness | 6 ... 48 dB per octave in 6 dB increments |
Insertion delay | 10...2000 ms, configurable |
Signal Generator | white noise, pink noise, sine wave, sweep tone |
Installation memory | 70 presets |
Display | signal availability for each input / output, peak level for each input / output (-3 dB before clipping), power, network data |
Food | Network ~90-240 V, 50/60 Hz |
Power consumption | 20 W |
Overall dimensions (WxDxH) | 483 x 229 x 44 mm |
Mounting in a 19 " rack | 1U |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other products
WP-DBT-22 - WP-DBT-22 Wall-mounted Bluetooth and unbalanced stereo audio to Dante converter
- Description short
- WP-DBT-22 Wall-mounted Bluetooth and unbalanced stereo audio to Dante converter
WP-DBt-44 - WP-DBt-44 Wall panel-converter of Bluetooth interface, unbalanced stereo audio signals and Dante
- Description short
- WP-DBt-44 Wall panel-converter of Bluetooth interface, unbalanced stereo audio signals and Dante