аMTX-2500 -
The aMTH-2500 series 2-zone audio matrix is designed for both 19-inch rack mounting and desktop use. It is ideal for both professional use and commercial audio solutions, as it is designed with speaker outputs that support a voltage of 100 V, or 8-16 ohms. The audio matrix includes two 100 V 500 W amplifiers, as well as a built-in USB/SD/FM/ Bluetooth media player, with 3 microphone inputs, a line input. It can connect up to 8 aCS-2500 call stations for dual-zone remote paging, as well as local input and control panels. Mic1 channel has the highest priority, and each mic input 1-3 has a +48V phantom power cut-off. All connections are made using a CAT6 cable. The mute port can be integrated with a fire alarm system or other third-party system. The amplifier is designed with full protection, including short circuit, overload and high temperature.
Feature:
- 2-zone audio matrix with integrated media player with USB / SD / FM / & Bluetooth
- Each entrance with a zone 1 or 2 selector switch on the front panel
- Output each zone with volume control+, volume control and mono mode
- 3 mic / line inputs, 1 RCA line input, 1 RCA EMC input and 1 mute input
- Combined microphone / line inputs 1-3 with +48 V phantom power cut-off
- Emergency remote mute port
- Selecting the input priority from high to low
- Support for eight 2-zone remote call stations
- Support for 2 remote control panels with 2 zones
- Short circuit, overload and high temperature protection
Specification:
Model | аMTX-2500 | ||
Description | Audio matrix with amplifier and USB/SD/FM/Bluetooth player | ||
Power of the amplifier | 2×500 W | ||
Impedance | 100 V, 8-16 ohms | ||
Interfaces |
3-Mic/line (2.5 mV) XLR, +48V Phantom power Jack 1-Line (250mV) - RCA 1-Mute (NO) 2-RJ45 for call stations and control |
||
Frequency range | 60 Hz-15 kHz (±3dB) | ||
Signal-to-noise ratio | Line ≥ 85dB, Mic ≥ 72dB | ||
THD | < 0.5% | ||
Protection | short circuit, clipping, overload and temperature | ||
Power consumption and profitability | 1200 W, 230 V AC; 50-60 Hz | ||
Sizes | 484×405×88 mm | ||
Weight | 13.7 kg |
Other products
WP-DBT-22 - WP-DBT-22 Wall-mounted Bluetooth and unbalanced stereo audio to Dante converter
- Description short
- WP-DBT-22 Wall-mounted Bluetooth and unbalanced stereo audio to Dante converter
WP-DBt-44 - WP-DBt-44 Wall panel-converter of Bluetooth interface, unbalanced stereo audio signals and Dante
- Description short
- WP-DBt-44 Wall panel-converter of Bluetooth interface, unbalanced stereo audio signals and Dante